You must be a CTBUH Member to view this resource.
Eq. Tower
Building
Completed
2017
Residential
All-Concrete
Green Star
202 m / 663 ft
63
1
633
205
5
5 m/s
55,487 m² / 597,257 ft²
You must be a CTBUH Member to view this resource.
You must be a CTBUH Member to view this resource.
Proposed
Construction Start
Completed
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
You must be a CTBUH Member to view this resource.
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The CTBUH lists a project manager when a specific firm has been commissioned to oversee this aspect of a tall building’s design/construction. When the project management efforts are handled by the developer, main contract, or architect, this field will be omitted.
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
These are firms that consult on the design of a building's façade. May often be referred to as "Cladding," "Envelope," "Exterior Wall," or "Curtain Wall" Consultant, however, for consistency CTBUH uses the term "Façade Consultant" exclusively.
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
30 October 2017 | Melbourne
Matthew Khoo of ICD Property is interviewed by Chris Bentley during the 2017 CTBUH Australia Conference.
25 September 2019
Melbourne-based developer ICD Property has secured construction funding from MaxCap Group and investment bank Goldman Sachs for its AU$440 million (US$297 million) residential tower development...
The design process for Eq. Tower began with a desire to create an intentional visual contrast with other recently constructed residential buildings which had emerged during a building boom, transforming a traditionally commercial area of central Melbourne into a mixed-use district. The building’s residential floors are positioned above a rectilinear podium topped with a landscaped outdoor terrace. As the upper floors are set back from the edges of the site, the façade is then sculpted as a result of analyzing the effect of sunlight and wind on the building and its surroundings. Directly above the podium, the building form resembles an hour glass, with rounder corners and concave surfaces which then transitions to a diamond form featuring a convex shape for the upper half of the building.
As outdoor balcony use becomes less practical at higher points within the building, balconies begin transitioning to winter gardens as the façade shape changes. Grill like features were then incorporated into the façade to still allow for interaction with elements on the building’s upper floors, while ensuring comfort of the residents. The façade is coated with a directional oxide coating, making it visually reactive to the changing angle of the sun throughout the day; in the morning and early evening, the glass glows with a pink hue, while at midday the exterior reflects the sky.
The sculpted form of the building was part of the project’s branding identity during the development phase and ensures the building remains a key visual point in the Melbourne skyline as the central business district continues to evolve.
Subscribe below to receive periodic updates from CTBUH on the latest Tall Building and Urban news and CTBUH initiatives, including our monthly newsletter. Fields with a red asterisk (*) next to them are required.
View our privacy policy